Buffing Isn’t About Pressure — It’s About Fibre Structure

The most common mistake during buffing isn’t rushing. It’s pressing harder.

Buffing should never rely on force. When pressure increases, so does friction — especially when residue hasn’t fully released.

Long-pile microfiber works by lifting residue away from the surface. Pressure collapses those fibres, defeating their purpose.

An 800GSM cloth allows residue to be collected within the pile rather than smeared across paint. The correct technique uses light passes, frequent folding, and patience.

Buffing becomes safer not because the cloth is thicker, but because it allows the surface to disengage from residue naturally.